ENGAGE MARKET — SOCIAL
Internal walkthrough · November 2026
Property lead
campaigns, end to end.
How an agent turns one CRM listing into live advertising across four channels —
in seven guided steps, with a single budget and one approved lead form.
52 Cummings Circuit, Willow Vale QLD 4209
Objective · Leads
$1,000 ex GST
14 days
Meta · Google Display · TikTok · LinkedIn
Campaigns → Create a marketing campaign
The experience at a glance
Seven guided steps. One example campaign.
Every page uses the same example: a Just Listed / For Sale campaign for
52 Cummings Circuit, Willow Vale QLD 4209 — $1,000 ex GST, 14 days, four channels.
1
Startp. 3
“Promote a property” — from scratch or a saved preset
2
Property & objectivep. 3
Pick the listing from the CRM; objective is Leads
3
Channels, budget & durationp. 4
Four channels, $1,000, 14 days — allocation handled
4
Creative & copyp. 5–7
One master creative — customise it in the built-in editor
5
Lead formsp. 9–10
The office’s approved form, native on every platform
6
Targetingp. 8
Managed channels arrive ready; manual ones guided
7
Review & launchp. 12
One summary, one click — leads route to the CRM
How to read this document
Each wizard page pairs a full screenshot with three notes:
What this page does, User decides (the choices the agent makes)
and System handles (what happens automatically, behind the scenes).
Promote a property → Start from scratch → the listing arrives from the CRM, matched and compliance-ready
Steps 1–2 · Start & objective
Start a campaign, pick the property & objective
One entry point — Promote a property — then two questions: what to promote and why. The agent starts from scratch, picks the listing from the CRM, and keeps the pre-marked Leads objective.
What this page does
Offers two ways in: Start from scratch — every decision visible — or Use a campaign preset, which starts from a saved template with channels, wording and budget pre-chosen.
User decides
How to begin, which property, and the objective. This walkthrough uses Start from scratch, selects 52 Cummings Circuit, and keeps the recommended Leads objective.
System handles
Once selected, the system matches the CRM record — address, price, photos and agents arrive already filled in — and sets the ad category (Housing) required for compliance.
Objective dialog — Leads (“Get more enquiries”) preselected as Recommended
Step 3 of 7 — $1,000 · 4 channels · 14 days, with the split handled automatically
Step 3 · Budget & channels
Channels, budget & duration
One page sets how much, where and how long. The agent enters a total budget of $1,000 ex GST, selects channels and drags the duration to 14 days.
What this page does
Turns three simple inputs — budget, channels, duration — into a complete media plan. As channels are ticked, the page shows what the budget supports: the longest run it can sustain and how many channels fit.
User decides
The agent picks the channels (here Meta, Google Display, TikTok and LinkedIn) and sets budget and duration. Everything stays within the bounds the budget supports — the page won’t allow an undeliverable plan.
System handles
Smart budget allocation splits the total across the chosen channels behind the scenes, weighted by performance potential. Guardrails quietly adjust what’s allowed as budget and channels change — the agent never has to work out the maths.
Step 4 of 7 — Just Listed templates, property photos and the built-in editor
Step 4a · Creative
Creative direction
The agent chooses the look of the campaign: the creative type (Just Listed), a format — single image, carousel or video — and a starting template.
What this page does
Gives the agent a gallery of ready-made property templates organised by campaign type, plus the listing’s own photos pulled from the CRM at step 2. Any template can be edited in the built-in editor.
User decides
Format and template. This campaign uses a single image creative — the simplest path, and the one most lead campaigns start with. Carousel and video are one click away for listings that suit them.
System handles
The chosen creative becomes the master artwork. Each platform automatically receives correctly sized versions later — nobody crops 4 sizes by hand.
Meta — wording on the left, live feed preview on the right
Step 4b · Copy & preview
One campaign, four native ads
The agent reviews the wording for each channel with a live in-platform preview beside it — the same campaign rendered the way each platform will actually show it.
What this page does
Pre-fills each channel’s copy from the property data and campaign type, then lets the agent fine-tune per platform: primary text, headline, description, call to action and destination.
User decides
The wording. Accept the pre-filled copy or edit any field; AI rewrite, CRM merge fields and emoji helpers are one tap. Formats can also be switched per channel here (Meta carousel, LinkedIn document, and so on).
System handles
Merge fields resolve at launch; the creative is adapted to each platform’s placements; and the preview shows exactly what buyers will see — no surprises after go-live.
Same campaign on Google Display — responsive ads built from the property photos
Step 4 of 7 — the built-in editor, opened straight from the creative card
Step 4c · Creative editor
Customise the design in the built-in editor
The creative card’s Edit button opens a full design editor over the campaign — a Canva-style canvas with the office’s template loaded, ready to tweak.
What this page does
Opens a drag-and-drop design editor (the same one behind the office’s saved templates) with the campaign’s square creative loaded — layout, fonts and colours all editable in place.
User decides
Everything visual: move, resize or restyle elements, add text and shapes, swap in different photos, and draw from the brand kit’s colours and fonts. Changes are saved back to the campaign.
System handles
Property details — address, price, photos — merge into the design automatically, and portrait and landscape versions are derived from the square master. The office’s template library lives in Settings → Templates.
Step 6 of 7 — Meta expanded: locations, radius map and segments; managed channels stay collapsed
Step 6 · Targeting
Targeting & setup
Each channel is configured the way that channel works best. Channels the office asked Social to manage arrive ready; the agent completes only the manual ones.
What this page does
Shows every channel as a card with a live audience estimate. Managed channels arrive targeted and marked READY; manual channels open a guided editor for locations, demographics and audience segments.
User decides
Only what’s manual. A manual channel (here Facebook + Instagram) opens a guided editor: the property’s postcode plus a 30 km radius, ages 18–65, and audience segments such as House Owners. Estimated reach updates as choices change.
System handles
Google Display, TikTok and LinkedIn arrive pre-configured. A channel only reports READY when its requirements are met, and the smart budget allocation sits underneath, weighted by channel performance potential.
Step 5 of 7 — approved forms on the left, live native preview on the right
Step 5 · Lead forms
Pick the approved lead form
Before launch, the agent chooses the lead form buyers will fill in. The campaign uses the office’s approved “For Sale Campaign” form — with a live preview.
What this page does
Lists the office’s approved forms with their categories and platform readiness, and previews the selected form live for each channel on the right.
User decides
Which approved form to use — one decision, made once. The agent doesn’t write questions here; forms are managed centrally in Settings so every lead asks the same approved questions.
System handles
Platform readiness is checked automatically per channel, the form is adapted natively for each platform, and every lead captured is routed straight to the office CRM. Forms can be created or edited from here too.
Settings → Lead forms → Edit — the master form behind the campaign
Settings · Lead forms
The master lead form
The form behind the campaign lives in Settings → Lead forms. It’s built once, approved once, and reused by every campaign that needs it.
What this page does
Holds the questions, greeting, consent message, call to action and routing for a lead form — the single source of truth the wizard picks from.
User decides
The office (or marketer) decides what to ask: which contact fields, which custom questions, where responses are assigned and who is notified. This “For Sale Campaign” form is the default for property enquiries.
System handles
Edits to the master form apply everywhere it’s used — including live campaigns — so wording and compliance stay consistent without touching a single ad.
Vault CRM — the Enquiry Holding Area; one enquiry highlighted from capture to contact
After the lead · Routing
Leads route to the CRM
Where leads go is decided once, on the lead form itself. From the moment a buyer submits, the CRM does the receiving.
1
New lead captured automatically
A lead form submission from a Facebook or Instagram ad lands straight in the Vault Enquiry Holding Area.
2
Matched to the right property
The lead is linked to the relevant property automatically — the team knows exactly what the enquiry is about.
3
Lead responses come through too
Anything extra captured in the native lead form lands in the Comments section — context before the first contact.
4
Contact details are ready to action
The lead’s contact details are created in Vault against the property — everything needed to follow up quickly.
Set once on the lead form — CRM destination, assign-to and email notifications
Step 7 of 7 — the complete campaign on one screen; the order card commits it
Step 7 · Review & launch
One review, one click — and it’s live
Everything appears on one screen before any money is committed — then one click on Place order turns the plan into live campaigns. There is no platform-by-platform setup after this point.
What this page does
Summarises the whole order — creative, targeting, forms, budget and duration — with combined estimated reach (here 82K–112K people) and the full total including GST ($1,100).
User decides
Read, confirm, launch. Nothing is edited on this page by design — every section links back to the step where it belongs. This walkthrough stops at the review screen; in a real campaign, this is the moment the budget is committed.
System handles
Validates the entire order before showing the button — creative set, targeting ready, an approved form attached, budget fully allocated — then builds and submits each channel’s campaign with tracking, and reports back as platforms activate. The vendor report starts automatically, so the seller sees results too.
Why it works
Key product principles
The wizard feels simple because everything complicated has a home: either a decision the agent makes,
or a job the system does. These six principles run through every step.
01
One campaign, every channel
The agent builds once. Each platform receives its own native format, copy and lead form — generated, not re-created.
02
Smart budget allocation
The agent sets one total. The system splits it across channels by performance potential and keeps every plan deliverable.
03
Approved forms, reused everywhere
Lead forms are built and approved once in Settings, then adapted natively per platform. Campaigns never freelance their own questions.
04
Leads land in the CRM instantly
A submitted lead is assigned, notified and logged automatically — with the property and campaign attached.
05
The agent stays in control
Objective, property, budget, duration, wording and targeting are the agent’s decisions. Everything else is handled for them.
06
Nothing launches half-configured
Readiness checks and a single review screen stand between the agent and a live campaign — so the first launch is a safe one.
The result: a lead campaign an agent can set up in minutes — and a lead their office sees the moment it happens.